Liaoning LotusNine International Trade co.,ltd

Home> Industry Information> Water treatment and anticorrosion methods in heating systems

Water treatment and anticorrosion methods in heating systems

October 30, 2020

In order to make heating equipment safe, reliable, economic and reasonable operation, and protect the environment, reduce the pollution of groundwater.This requires the choice of environmentally friendly water treatment methods, do a good job of scale prevention, corrosion prevention, prevention of man-made water loss.Make heating heating system in no scale, no rust, no corrosion under the state of high quality heating, so as to achieve energy saving, water saving, emission reduction, reduce maintenance, prolong the service life of the equipment comprehensive benefits.

The principles for selecting water treatment methods are as follows:

First of all, to ensure the safe operation of the equipment, followed by the most economical, the most environmentally friendly, the most simple operation, the operation of the most easily controlled water treatment method is the best water treatment method.

The basic objectives of the water treatment setting of the hot water heating system are:

(1) Minimize metal corrosion of the system.

(2) The water quality of the secondary water heating system indirectly connected with the heat source shall meet the requirements of the heating system. Meanwhile, the generation of scale and sludge and the growth of microorganisms shall be inhibited to prevent the blockage of heating equipment and pipes, especially to ensure the normal operation of radiator thermostatic valves and mechanical heat meters.

(3) It does not pollute the environment, especially the groundwater.

(4) The method is simple and feasible with low cost.

Monitoring technology and description of water quality treatment and corrosion prevention

1. The system adopts automatic control to operate and stop;The system is designed with automatic and manual control modes, which can be switched according to different conditions.The system is equipped with perfect protection device and monitoring equipment, and the control system is controlled by computer program, realizing forward, reverse washing and regeneration functions, realizing automatic control, real-time status display, and containing remote control functions.

2. Pipeline valve parts in the system: the pipes are made by UPVC. The pipes require products of the same material and brand.

3. The dosing barrel tank in the softened water system can store the dosage for at least 1 week, which is controlled by the liquid level system;

4. Install pressure gauge at the outlet of each processing stage of the system;

5. In addition to the control cabinet in the control room, all equipment of the system shall have on-site control cabinet, which is convenient for maintenance and emergency treatment;

6. The softening water system in the boiler room shall adopt one use and one standby design to ensure safe and continuous operation.7, the valve installation position should not be too high, it must be easy to maintain;

8. The pipe shall not bend.

9. The liquid level control of pump startup and shutdown is controlled by the high and low liquid level sensor of water tank;

10. Automatic control operation and flushing function.



The above is the Water treatment and anticorrosion methods in heating systems we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> Water treatment and anticorrosion methods in heating systems

Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send