Industry Information

Update June 29, 2021

Selection of plate material for four common working conditions of plate heat exchanger

The plate heat exchanger is the most important heat transfer link in the plate exchange system. The quality of metal material directly affects the service life of the equipment.So in the parameter...

Update June 10, 2021

Cleaning Plate Heat Exchanger Scaling 4 Principles 5 Requirements 6 Steps

1, the choice of cleaning agent The choice of cleaning agent, currently used is pickling, which includes organic acids and inorganic acids.Organic acids mainly include oxalic acid, formic acid and so...

Update June 04, 2021

The Difference Between Evaporator And Condenser

What is the difference between evaporator and condenser?What's the difference between an evaporator and a condenser?Recently, some people often ask these questions. Now, the difference between...

Update March 09, 2021

Details determine success or failure, perfect solution to the assembly of plate heat exchanger seal failure factors

In the plate heat exchanger design, the overall structure of the plate and the sealing strength has a very close relationship, reasonable sealing structure design can not only improve the stiffness...

Update January 27, 2021

Method of reducing heat exchanger resistance

The heat transfer coefficient can be increased and the area of heat exchanger can be reduced by increasing the average velocity of medium in the flow channel between plates.However, increasing the...

Update January 19, 2021

About freezing crack replacement steps and precautions of plate heat exchanger

About frost crack of plate heat exchanger replacement steps and matters needing attention in order to keep the field replacement plate in meet the requirements, ensure the quality of the replacement...

Update November 18, 2020

Schematic diagram of plate heat exchanger circulation

Plate heat exchanger is a kind of high efficiency heat exchanger which is composed of a series of corrugated metal sheets.A thin rectangular passage is formed between the plates through which heat is...

Update November 10, 2020

Two methods are used to identify the plate quality of plate heat exchanger

For plate heat exchanger application has been very wide, no matter civil or industrial can not be without its figure, that as one of the main components of plate heat exchanger plate (metal plate: to...

Update October 30, 2020

Water treatment and anticorrosion methods in heating systems

In order to make heating equipment safe, reliable, economic and reasonable operation, and protect the environment, reduce the pollution of groundwater.This requires the choice of environmentally...

Update October 20, 2020

The advantages, disadvantages and dielectric resistance of commonly used rubber gaskets are introduced

1. FKM Fluororubber is an elastic polymer with fluorine atoms attached to the carbon atoms of the molecular backbone or side chain obtained by polymerization or condensation of fluorine-containing...