Gasketed Hastelloy Plate

0.5mm titanium low-theta plate for heat exchanger S65

• Packaging: plywood package
• Min. Order: 50 Bag/Bags
• Model No.: s65
• Transportation: Ocean,Air

The heat exchanger plate can be made of by many materials including SS304, SS316, Titanium, hastelloy, etc. It also has a wide range of applications, including HVAC industry, marine industry, and dairy or food industry.Unique corrugated and flow channel design enables the medium to generate strong turbulence. product...

Contact Now

Liquid to liquid heat exchanger ss316 plate GX13

• Packaging: WOODEN BOX PACKAGE
• Min. Order: 50 Bag/Bags
• Model No.: GX13
• Transportation: Ocean,Air

The special diagonal flow design makes the fluid distribution more uniform, reduces the flow dead zone, increases the flow and makes better use of the effective heat transfer area of the plate. Especially in the case of small temperature difference of heat transfer, the heat transfer is more sufficient. product...

Contact Now

gasket heat exchanger 0.5mm ss304 hastelloy plate TS20

• Packaging: PLYWOOD PACKAGE
• Min. Order: 50 Bag/Bags
• Model No.: TS20
• Transportation: Ocean,Air

This plate is a plate for TS20 gasketed plate heat exchanger. We can use it to assemble 316 stainless steel plate heat exchanger, juice to water plate heat exchanger and heat exchangers with other uses. It can be applied to energy and utilities, home and personal care and so on.The herringbone corrugation pattern can...

Contact Now

Titanium low-theta plate for heat exchanger S65

• Packaging: wooden case
• Supply Ability: 5000
• Min. Order: 50 Bag/Bags
• Model No.: S65

Product Details Diverse plate models We have almost 150 models for detachable plate heat exchanger.The plate angle is distinguished between high theta and low theta,chevron is divided into shallow groove,deep groove and supper deep groove which can be assembled to narrow passage PHE,wide passage PHE and super wide...

Contact Now

S7A gasket heat exchanger 0.6mm hastelloy plate

• Packaging: PLYWOOD PACKAGE
• Min. Order: 50 Bag/Bags
• Model No.: S7A
• Transportation: Ocean,Air

The plate of the heat exchanger is compressed into a so-called herringbone corrugation pattern. This type of corrugation produces spiraling flows with high turbulence. So it can have a high heat transfer coefficients and it is easy to clean it. Product Details DIVERSE PLATE MODELS We have almost 150 models for...

Contact Now

Epdm rubber gasket ss316 plate heat exchanger m6b

• Packaging: wooden box package
• Min. Order: 1 Bag/Bags
• Model No.: M6B
• Transportation: Ocean

For materials with certain viscosity and solid content, the design of plate heat exchanger can achieve the highest shear force, thus reducing scaling. High heat transfer efficiency and require less heat transfer area. Plate material Hastelloy Connection material

Contact Now

Heat exchanger rubber gasket viton replace T20S

• Packaging: CARTON PACKING
• Min. Order: 50 Bag/Bags
• Model No.: TS20
• Transportation: Ocean,Air

We use vulcanized epoxy adhesive to make the gasket firmly adhere to the gasket groove. Some other manufacturers do not use vulcanized adhesives, when the heat exchanger is opened gaskets often fall off. Product Details HIGH QUALITY The rubber material are mixed in closed space with controllable pressure and...

Contact Now

FKM plate heat exchanger gasket TS20

• Packaging: carton packing
• Min. Order: 50 Bag/Bags
• Model No.: ts20
• Transportation: Ocean,Air

Product Details Rubber The characteristics of the polymer EPDM

Contact Now

Cross flow plate heat exchanger gasket

• Packaging: carton packing
• Min. Order: 50 Bag/Bags
• Model No.: s42
• Transportation: Ocean,Air

The gasket can be made of EPDM, NBR, FKM, VITON, ect, other material also can be used. The gasket is the unique non-glued. “Sonder lock” gasket which locks the plate with the strong bottom. product details more products

Contact Now

nt150s plate type heat exchanger mould

• Packaging: PLYWOOD PACKAGE
• Min. Order: 1 Bag/Bags
• Model No.: NT150S
• Transportation: Ocean

We produce NT150S heat exchanger plate mould for both H and L type. The plate mould can be used for 5-10 years with correct operation. The channel depth of NT150S heat exchanger plate mould is 3.2mm, the holes diameter is 155mm. The material for the mould is CR12, or CR12 Mov, which can be decided by our client....

Contact Now

heat exchanger plate s47mould

• Packaging: PLYWOOD PACKAGE
• Min. Order: 50 Bag/Bags
• Model No.: s47
• Transportation: Ocean,Air

The S47 heat exchanger plate can be made of AISI 304 or 316, 254 SMO and titanium. Other material is also available on request. The heat exchanger plate thickness range can be from 0.5mm to 1.0mm. product details more products Company Information LianJiu (Liaoning) Heat Transfer Technology Co.,Ltd is devoted to supply...

Contact Now

moulds for plate heat exchanger V45

• Packaging: plywood package
• Min. Order: 1 Bag/Bags
• Model No.: v45
• Transportation: Ocean

We are professional manufacturer of heat exchanger mold in China. V45 heat exchanger plate mold used for the V45 plate. Precise mapping , accurate data , qualified mould with longer service life. product details more products company information Li

Contact Now